02.A
13-05-03
CONTENTS
Contents
Page 02
Tools necessary for dismantling the various parts of the appliance:
Page 03
Step 1
Removing the top cover (
B360
)
Page 03
Step 2
Removing and/or dismantling the programmer knob assembly
Page 03
Step 3
Removing and/or replacing the programmer (
B290
) from the control panel (
B270
)
Page 04
Step 4
Removing and/or replacing the buttons (
B210
) and switches (
B330-B340
) from the control panel Page 04
Step 5
Removing and/or replacing the cover piece (
B260
) from the control panel (
B270
)
Page 05
Step 6
Removing and/or replacing the control panel (
B270
)
Page 05
Step 7
Removing and/or replacing the door microswitch (
B590
)
Page 06
Step 8
Removing the door
Page 06
Step 9
Removing the door glass (
B120
)
Page 06
Step 10
Removing the door hinge (
B060
)
Page 07
Step 11
Removing the door handle (
B710
)
Page 07
Step 12
Removing the brush support brackets and relative humidity sensing brushes,
consisting of:
- Support bracket (
A620
)
- Brush holder (
A610
)
- Humidity sensing brush (
A630
)
- Pin (
A640
)
- Spring (
A570
)
Page 08
Step 13
Removing and/or replacing the power supply cable and/or terminal block (
B450
)
Page 08
Step 14
Removing and/or replacing heater element (
B560
) and air inspection cover (
B051
)
Page 09
Step 15A
For driers produced prior to week 18 of 2003
Removing and/or replacing:
- the manual reset safety thermostat (
B006
)
- the automatic reset maximum temperature thermostat (
B030
)
Page 09
Step 15B
For driers produced from week 18 of 2003 (from serial number 200318...)
Removing and/or replacing:
- the manual reset safety thermostat (
B006
)
- the automatic reset maximum temperature thermostat (
B030
)
Page 09
Step 16A
For driers produced prior to week 18 of 2003
Removing and/or replacing the rear panel (
B580
)
Page 10
Step 16B
For driers produced from week 18 of 2003 (from serial number 200318...)
Removing and/or replacing the rear panel (
B580
)
Page 11
Step 17
Removing and/or replacing the rear drum seal with felt (
B025
)
Page 12
Step 18
Removing and/or replacing the drive belt (
A290
)
Page 12
Step 19
Removing and/or replacing the drum assembly (
A300
)
Page 13
Step 20
Replacing and/or removing the drum paddle with probe (
A320
) and/or the drum paddle
without probe
(A310
) from the drum assembly (
A300
)
Page 13
Step 21
Replacing and/or removing the slide blocks (
A530
) and the felt seal (
A410
) from the
drum support surround
(A340
)
Page 13
Step 22
Removing and/or replacing the motor (
A120
)
Page 14
Step 23
Removing and/or replacing the drum support surround (
A340
)
Page 15
Step 24
Replacing and/or removing the left hand side panel (
B040
) and/or the right hand side panel (
B230
)
Page 16
Step 25
Removing and/or replacing the plastic plinth (
B007
) from the front panel (
B070
)
Page 17
Step 26
Replacing the bottom panel (
A260)
Page 17
IMPORTANT:
This Manual must be used together with all the other technical documents appertaining to the product itself (Exploded views,
technical documents and any other technical information provided).
