2/11
©
PHANTOS
®
Distributed in Australia by PHANTOS www.phantos.com.au
fixture is not exposed to extreme heat or dust.
▪
Avoid using the unit in locations subject to possible impacts.
▪
This unit is designed for indoor/undercover use only.
▪
Always turn off, unplug power and allow fixture to cool before
servicing.
▪
Ensure that fixture is properly grounded. Do not attempt to remove
or break off the ground prong from the electrical cord. This prong is
used to reduce the risk of electrical shock and fire in case of an
internal short.
▪
Always make sure that you are connecting to the proper voltage
and that the line voltage you are connecting to is not higher than
that stated on decal or rear panel of the fixture.
▪
To prevent risk of fire or shock, do not expose fixture to rain or
moisture.
▪
Make sure power cord is never crimped or damaged. Do not
attempt to operate this unit if the power cord has been frayed or
broken.
▪
Do not remove the cover under any conditions, unless consent
given by distributor. There are no user serviceable parts inside.
▪
DO NOT connect this product to a dimmer or rheostat.
▪
ONLY connect this product to a grounded and protected circuit.
▪
ONLY use the hanging/mounting bracket to carry this product.
▪
USE a safety cable when mounting this product overhead.
▪
Never aim the output nozzle directly at people.
▪
Locate the snow machine in a well-ventilated area. Never cover
the unit
’
s vents. In order to guarantee adequate ventilation, allow a
free air space of at least 20 cm around the sides and top of the unit.
▪
Never add flammable liquids of any kind (oil, gas, perfume) to the
snow liquid.
▪
Never drink snow liquid. If ingested, call a doctor immediately. If
snow liquid comes in contact with skin or eyes, rinse thoroughly with
water.
3/11
©
PHANTOS
®
Distributed in Australia by PHANTOS www.phantos.com.au
▪
Use only the high-quality snow liquid that your dealer recommends.
▪
Always make sure there is sufficient liquid in the snow liquid tank.
Operating this unit without liquid may cause permanent damage to
the machine.
