B
08.06
23
CHAPTER
PAGE
ISSUE
ELECTRIC SYSTEM TROUBLESHOOTING
ENGLISH
SECTION 2
Troubleshooting
SECTION 2
B
- TROUBLESHOOTING
1
2
3
2.
Check continuity of purple-yellow cable
-
Disconnect regulator connector
-
Disconnect four-way connector of flywheel
magneto
-
Connect Tester “ ” between purple-yellow cable
of flywheel connector (system side) and pink
cable of regulator connector.
CONTINUITY
3.
Key switch
-
Disconnect connector (1) of key switch
-
Turn key “ON”
-
Connect Tester “ ” and check continuity as
follows:
Terminal (+)
Yellow cable (2)
Terminal (-)
Green-black cable (3)
See “Checking connectors” on page 11
COMPLIANT
4.
Connections
-
Check all connections to lighting system
See “Circuit diagram”
COMPLIANT
Replace voltage regulator
NO CONTINUITY
Purple-yellow cable interrupted: resume connection
See “Circuit Diagram”
NOT COMPLIANT
NOT COMPLIANT
Resume system’s connections
Faulty key switch
Replace