Malaguti SPIDER MAX RS 500, Руководство по обслуживанию

Страница: 61 / 81

60 02/08
BRAKE
CALLIPERS
An abnormal resistance
or an excessive travel
of the brake levers may
indicate the braking
system malfunctioning.
• Open up the clamp (F).
• Undo the screws (V2) in order
to release the fork clipper.
FRONT CALLIPER
REPLACEMENT
NOTE - The front callipers
have the same technical
specifications but are one
right and one left.
• After removing the front
brake callipers, release
the screw/coupling (V) and
extract the swinging
coupling (A) and the
gaskets (B).
Do not use the brake lever after removing the callipers: the piston may
jump off, causing brake liquid leaks. The liquid is corrosive and may
cause serious personal damage.
After removing the callipers from their housing, place a container
underneath in order to let the liquid drain from the hydraulic system and
dispose of it in compliance to the law in force.
V
2
30 ± 20%
FRONT CALLIPER
DISASSEMBLY
In order to extract the pads:
• Release and remove the
screw (V).
• Shift downward the stop
plate (A), in order to release
the pins (B) and extract
them from the other side of
the calliper unit.
V
20 ± 10%
F. 142
V
F. 144 F. 145
A
B
F. 143
A
V
B
B
V
2
F
V
A