Malaguti Blog 126, Руководство по обслуживанию

Страница: 53 / 79

53 03/09
125 - 160 cc
Blog Blog Blog Blog Blog
DISASSEMBLING RADIATOR UNIT
• Disassemble the radiator unit, as shown in the figure.
COOLING SYSTEM DRAINAGE
The cooling system is "self-bleeding".
But if, after the radiator is reassembled, filled with fluid and tested with
the engine idling for a few minutes, an abnormal rise in temperature is
found, manually bleed it by following these steps:
F. 117
F. 116
T
• Partially lift and rotate the helmet case sideways (page 38).
• Wait until the fluid has cooled down, unscrew the cap and completely fill the radiator.
• Slide off the tube (T) (after freeing it from the clamps); Liquid should come out from the
union, in abundance.
• Insert the tube (T) and the cap radiator.
• Before replacing the helmet case, start the engine and check that there is no abnormal
rise in temperature.