Malaguti Blog 126, Руководство по обслуживанию

Страница: 18 / 79

18 03/09
125 - 160 cc
Blog Blog Blog Blog Blog
Adjust both shock absorbers using these instructions.
Uneven adjustment can compromise the stability of the vehicle.
Perform adjustments using the special key equipped on the ring nut (A), located on the upper part of the shock absorbers; turning
it anti- clockwise will increase the strength of the spring (increase in load)
SHOCK ABSORBER ADJUSTMENTS
5 adjustment positions are included:
1) driver only (to 75 kg)
2) driver only (over 75 kg)
3) driver and case
4) driver and passenger
5) driver, passenger, and case.
CHANGE FORK OIL
• Place an appropriate drip pan under the slider and remove the screws (V).
• Drain out as much oil as possible.
• Proceed to dismantle the fork legs, as described p. 57.
• Turn the fork legs upside-down, to let the remaining oil drain out.
Hydraulic oil is corrosive and may cause personal injury.
Do not improperly dispose of used oil in the environment.
• Reassemble the fork components and the fork on the
motorcycle.
• Carefully pour the "new" oil in the fork.
V
17 ± 15%
FORK
F. 23
A
F. 22
V
• Remount the drain screw (V).
NOTE - When remounting, replace the copper washer
located under the screw (V).
Quantity per fork: 98 cc.