Figure 6, ON/OFF-Switch
2.5 LED-indicators
Three LED-indicators are mounted beneath the product label, see figure 7 below.
The meaning of these indicators is as follows:
DATA
: Continuous flashing light means that the unit is working properly and ready for
data collection, no proof of that a monitor is able to receive data, though. If irregular
flashing is seen on this LED, it means erroneous antenna configuration, possible
software version issue. This LED is switching to continuous light when the unit enters
data collection.
GPS
: Flashing light mean that the GPS option is installed and that the internal
computers are successfully communicating with the GPS-unit. This LED-switch to
continuous light whenever there’s 4 or more satellites available. Nothing is told about
whether differential correction is active, the latter information is shown in the monitor.
INFO:
This LED indicates a serious system Error, whenever active. Please contact
your local distributor.
ON/OFF-Switch
Page 10 (16)
