W
iring diagram
Connect Lead wires with Brush holders
as described below.
* Brush holder
on switch side
:
Face the
Side opening
to
Housing R
side.
* Brush holder
on back side
:
Face the
Side opening
to
Housing L
side.
Housing L
Brush holder
Choke coil
Choke Coil
Noise suppressor
Put slacked Lead wire (purple) in these places.
Pass all Field lead wires under
Brush holder. And connect
them to Switch.
Fix the Field lead wire (red)
with the Lead wire holder on
Switch.
Fix the Lead wires with
Lead wire holder.
Do not route the Field lead wire (
Purple
)
over Brush holder or rib for Switch but
route it between the ribs.
Wiring of Field lead wires (orange), (purple) to Brush holder
Fig. D-2
Fig. D-3
Switch
If the Equipment of Radio Interference suppression is required, put Noise suppressor and Choke coil
in the position drawn above.
Rear side
Field
Side opening
Housing R side
Housing L side
Brush holder
on back side
Brush holder on Switch side
P
7
/
9