Maktec MT605, Техническая информация, Страница: 4 / 9

[3] DISASSEMBLY/ASSEMBLY
[3]-2. Spindle and Helical Gear
DISASSEMBLING
ASSEMBLING
(3) Remove Helical gear 35 and Ball bearing 6902ZZ ( Fig. 5) .
Note: 1. Use new Ring spring 13 after mounting Ball bearing 6902ZZ if it is deformed.
2. Make sure to fix Helical gear 35 at correct direction as in Fig. 6 .
Do the reverse step of Disassembling ( Fig. 5 , Fig. 4) .
3. Set Helical gear 35 to a supporting jig
and press Spindle with Arbor press
to remove Spindle from Helical gear.
4. Remove Ring spring 13
from Spindle.
5. Now, Ball bearing 6902ZZ
is removed from Spindle.
Fig. 5
Helical gear 35
Ring spring 13
Note: Make sure to use new Ring spring 13
when the removed one is deformed.
Ball bearing 6902ZZ
Spindle
Fig. 6
Locate the Grooved side to the small Ball bearing 606ZZ side
and mount Helical gear 35 to Spindle.
Ball bearing 606ZZ
Groove on Helical gear 35
R
epair
P 4 / 9