Maktec MT605, Техническая информация, Страница: 5 / 9

[3] DISASSEMBLY/ASSEMBLY
[3]-3. Armature
DISASSEMBLING
ASSEMBLING
(1) Separate Housing set R from Housing set L ( Fig. 4) .
(2) Remove Helical gear 35 and Ball bearing 6902ZZ ( Fig. 5) .
(3) Remove motor section ( Fig. 7) .
Do the reverse step of Disassembling ( Fig. 7 , Fig. 4) .
Note: Before mounting Armature and Field, mount Leaf spring to Housing L at the Bearing box for Ball bearing 627ZZ
of Armature’s commutator side ( Fig. 8) .
Fig. 7
Leaf spring
Housing L
1. Separate Motor section (Field and
Armature) from Housing L.
Then, remove Leaf spring.
2. Pull out Armature from Field.
Now Armature can be replaced.
Field
Armature
Armature
Field
Fig. 8
Housing L
Housing L
Leaf spring
Armature
Ball bearing
627ZZ
Make sure to insert Leaf spring between Housing and Ball bearing 627ZZ
as described below to support Ball bearing 627ZZ at the two portions.
Leaf spring
R
epair
P 5 / 9