Maktec 25MKP, Руководство по эксплуатации и использованию, Страница: 27 / 28

27
12.SHIPPING AND HANDLING
A)
PLACING THE BOILER ON VEHICLE
When the boiler is placed on vehicle, loading must be done with a
crane. Gates of the vehicle body must be opened previously.
Please use supporting ring while loading boiler with crane.
Pass the crane boom hook from the supporting ring.
Make sure that hook pim is in safety mode. Uphold the crane boom and
take the space. Slowly uphold the boiler that bottom level should be 30-
40cm up from the ground.
Avoid sudden moves that would cause boiler to shake. Move the boiler next
to vehicle in this way. After the boiler is placed next to vehicle,lift the boiler
from 30-40cm higher than the vehicle body and and take it down on vehicle
body correctly.
ATTENTION : Boiler must be carried in vertical position by using the
supporting ring. When the boiler is lifted up with crane, make sure there are no
living beings left under the boiler. Boiler must be carried with its accessories
installed on it.
B)
CARRYING BOILER ON VEHICLE
When the boiler is carried with vehicle, it must be tied to vehicle strictly, supporting
items should be placed around to avoid slipping. Boiler should not transported with
fragile, smashable items and living beings. Top of the vehicle must be covered with
canvas after placing boiler. Driver must keep away from the sudden moves that
would cause danger.
C) UNLOADING OF THE BOILER TO THE PLACE OF USE
Boiler should not be placed in work or residential areas, it must be placed in a seperate
boiler room.
When unloading the boiler to boiler room, crane must be used again, points that stated
in Clause A, must be considered.
If the place of use is not appropriate for crane entrance, boiler must be unloaded in a
proper place and carried with rollers to the intended place