Maktec 25MKP, Руководство по эксплуатации и использованию, Страница: 15 / 28

15
6
. FULL AUTOMATIC PELLET BOILER CONTROL
PANEL
On – Off – Reset This is on off button of the boiler. It is used to reset when the boiler breaks down.
Touch the button for 2 seconds to switch on, off and reset.
Fuel Load
This button is used for manuel preloading by only authorized services during initial operation
(End users must not do preloading)
Temperature
Setting To increase or decrease the boiler temperature, press
the button once and adjust settings with up and down buttons.
Fan Setting To adjust the fan speed, press the button once and adjust with up and down buttons.
Fuel Loading
Time (sec) If the factory settings do not suffice, press the button once to change the fuel loading values
and adjust with up and down buttons.
Fuel Waiting
Time (sec) If the factory settings do not suffice, press the button once to change the fuel waiting values
and adjust with up and down buttons.
Up Button
Enter the menu that will be readjusted and use this button to increase its value
Down Button
Enter the menu that will be readjusted and use this button to reduce the value.
Alarm Off The boiler makes a warning sound when it is out of order.
Button must be pushed once to turn off the sound. (Use the reset button to remove the boiler
from break down mode)
LCD Screen An LCD screen that allows to monitor the boiler's running equipment and set values.
ERROR CODES
H1 No Fuel
H2 Fuel Congestion
H3 Boiler Sensor Breakdown
H4 Boiler is Overheated
H5 No Burning
H6 Overheating on Fuel Pipe
H7 Ignition Fault
H8 Chimney Sensor Fault
H9 Overheating on Chimney
H10 Fan Breakdown
H11 Overhating of Boiler Water
IMPORTANT!!!