9
position on a smooth and level surface and check that the machine is stable, without oscillating.
If necessary, turn again and adjust the feet so that it does not sway when in the correct position.
6. The sandpaper is already installed. To replace it, refer to this manual in the “Maintenance” menu.
7. Place the angle guide (A) in the groove (B) of the table, as shown below.
8. A dust collector can also be connected directly to the dust outlet. Simply connect a hose directly
to the outlet nozzle as shown in the figure below. Consult the MAKSIWA Catalog to find products
that fulfill this function. 8. A dust collector can also be connected directly to the dust outlet.
Simply connect a hose directly to the outlet nozzle as shown in the figure below. Consult the
MAKSIWA Catalog to find products that fulfill this function.
NOTE: The exhaust system is NOT included with this equipment.
