MAKSIWA CBC.P, Руководство пользователя

Страница: 84 / 155

MAKSIWA CB
C
.P PREMILLING UNIT
3
1 DESCRIPTION AND AIM OF THE UNIT
The feeding tray cuts the edge tape with a guillotine at the trail of each panel, and feeds it
automatically, so the edge is ready to edgeband with the next panel.
2 WORK DESCRIPTION AND ADJUSTMENT
2.1 Screen activation
Active NOT active
Cutter (guillotine)
Feeding unit
2.2 Work description
Guillotine
The group receives the signal from the limit switch 20S12 and after a delay (set in screen); it
activates the cutter (the guillotine).
Feeding system
Since the feed shaft is rotating, the feeding piston activates when the panel is fed into the
machine, so edge tape encounters with the panel at the middle of the first roller for
edgebanding process.
Before feeding first panel into the machine, feed the edge unto the cut line of
guillotine, and adjust the height with edge clamps, so the edge can move freely
without play.
Edge clamps
Feeding
shaft
Feeding
piston