MAKSIWA CBC.P, Руководство пользователя, Страница: 28 / 155

MAKSIWA CB
C
.P – USER INTERFACE
9
7 ALARMS
ALARMS menu shows all active alarms. You can press the DELETE ALARM button when
the problem has been resolved.
7.1 Alarms list
Alarm
Possible
cause
Solution
EMERGENCY
STOP BUTTON
Emergency
button
pressed
Emergency button pressed. Release the emergency
button and reset the alarm from screen. Don’t use
emergency button for stopping drag chain and unit,
instead use “OFF” button from the MAIN menu.
Emergency
circuit
damaged
Contact a Maksiwa authorised technician.
MAXIMUM
TEMPERATURE
Temperature
sensors plug
disconnected
Check if the temperature sensor plug is correctly
connected.
Temperature
sensor
damaged
If the temperature plug is connected, and still screen
shows asterisks instead of reading temperature, contact
an authorised technician to replace the temperature
sensor.
SSR damaged
If the temperature keeps heating, above maximum
temperature, disconnect the machine and contact
technical service (solid state relay).
PLC output
failure
If the temperature keeps heating, above maximum
temperature, disconnect the machine and contact
technical service.
AIR PRESSURE
Not enough air
pressure
Check if the air pressure is stable at 0.6MPa.
Air pressure
switch failure
Replace air switch.
TOO CLOSE
PANELS
Not enough
distance when
feeding panels
Empty the machine and keep the safe distance feeding
panels.
Limit switch
20S11 failing
Replace limit switch.