4 ENGLISH
3.
When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another.
Shorting the battery termi-
QDOVWRJHWKHUPD\FDXVHEXUQVRUD¿UH
4.
Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
WDFWDFFLGHQWDOO\RFFXUVÀXVKZLWKZDWHU,I
liquid contacts eyes, additionally seek medical
help.
/LTXLGHMHFWHGIURPWKHEDWWHU\PD\FDXVH
irritation or burns.
Service
1.
+DYH\RXUSRZHUWRROVHUYLFHGE\DTXDOL¿HG
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
2.
Follow instruction for lubricating and chang-
ing accessories.
3.
Keep handles dry, clean and free from oil and
grease.
Cordless Chain saw safety warnings
1.
Keep all parts of the body away from the saw
chain when the chain saw is operating. Before
you start the chain saw, make sure the saw
chain is not contacting anything.
A moment of
inattention while operating chain saws may cause
entanglement of your clothing or body with the
saw chain.
2.
Always hold the chain saw with your right
hand on the rear handle and your left hand on
the front handle.
Holding the chain saw with a
UHYHUVHGKDQGFRQ¿JXUDWLRQLQFUHDVHVWKHULVNRI
SHUVRQDOLQMXU\DQGVKRXOGQHYHUEHGRQH
3.
Hold the power tool by insulated gripping
surfaces only, because the saw chain may con-
tact hidden wiring.
Saw chains contacting a "live"
wire may make exposed metal parts of the power
tool "live" and could give the operator an electric
shock.
4.
Wear safety glasses and hearing protection.
Further protective equipment for head, hands,
legs and feet is recommended. Adequate protec-
WLYHFORWKLQJZLOOUHGXFHSHUVRQDOLQMXU\E\À\LQJ
debris or accidental contact with the saw chain.
5.
Do not operate a chain saw in a tree.
Operation
of a chain saw while up in a tree may result in
SHUVRQDOLQMXU\
6.
Always keep proper footing and operate the
FKDLQVDZRQO\ZKHQVWDQGLQJRQ¿[HGVHFXUH
and level surface.
Slippery or unstable surfaces
such as ladders may cause a loss of balance or
control of the chain saw.
7.
When cutting a limb that is under tension be
alert for spring back.
:KHQWKHWHQVLRQLQWKH
ZRRG¿EUHVLVUHOHDVHGWKHVSULQJORDGHGOLPEPD\
strike the operator and/or throw the chain saw out
of control.
8.
Use extreme caution when cutting brush and
saplings.
The slender material may catch the saw
chain and be whipped toward you or pull you off
balance.
9.
Carry the chain saw by the front handle with
the chain saw switched off and away from your
body. When transporting or storing the chain
VDZDOZD\V¿WWKHJXLGHEDUFRYHU
Proper
handling of the chain saw will reduce the likelihood
of accidental contact with the moving saw chain.
10.
Follow instructions for lubricating, chain ten-
sioning and changing accessories.
Improperly
tensioned or lubricated chain may either break or
increase the chance for kickback.
11.
Keep handles dry, clean, and free from oil and
grease.
Greasy, oily handles are slippery causing
loss of control.
12.
Cut wood only. Do not use chain saw for pur-
poses not intended.
For example: do not use
chain saw for cutting plastic, masonry or non-
wood building materials. Use of the chain saw for
operations different than intended could result in a
hazardous situation.
13.
Causes and operator prevention of kickback:
Kickback may occur when the nose or tip of the
JXLGHEDUWRXFKHVDQREMHFWRUZKHQWKHZRRG
closes in and pinches the saw chain in the cut.
Tip contact in some cases may cause a sudden
reverse reaction, kicking the guide bar up and
back towards the operator. Pinching the saw chain
along the top of the guide bar may push the guide
EDUUDSLGO\EDFNWRZDUGVWKHRSHUDWRU(LWKHURI
these reactions may cause you to lose control of
the saw which could result in serious personal
LQMXU\'RQRWUHO\H[FOXVLYHO\XSRQWKHVDIHW\
devices built into your saw. As a chain saw user,
you should take several steps to keep your cutting
MREVIUHHIURPDFFLGHQWRULQMXU\
Kickback is the result of tool misuse and/or incor-
rect operating procedures or conditions and can
be avoided by taking proper precautions as given
below:
0DLQWDLQD¿UPJULSZLWKWKXPEVDQG¿QJHUV
encircling the chain saw handles, with both
hands on the saw and position your body
and arm to allow you to resist kickback
forces. Kickback forces can be controlled by
the operator, if proper precautions are taken.
Do not let go of the chain saw.
'RQRWRYHUUHDFKDQGGRQRWFXWDERYH
shoulder height. This helps prevent unin-
tended tip contact and enables better control
of the chain saw in unexpected situations.
