12 ENGLISH
CAUTION:
Be sure to attach the hooks of the
shoulder strap to the tool securely.
If the hooks are
attached incompletely, they may come o and cause
injury.
CAUTION:
Be sure to use the shoulder strap
dedicated to this tool.
U sing other shoulder strap
may cause an injury.
H ang the hooks of the shoulder strap ov er the hanging
holes on top of the tool.
Fig.22:
1.
S houlder strap
2.
H ook
3.
H anging hole
OPERATION
CAUTION:
Put the shoulder strap on the
shoulder, and hold the tool firmly with both
hands.
NOTICE:
At the very beginning of operation, the
flexible shaft tends to vibrate at a higher ampli
-
tude. The tool w ill restore the normal amplitude
after you squeeze and release the sw itch trigger a
few times repeatedly.
Make sure to throw in and keep the v ib ration head
stand straight during operation. U se the tool w ithin the
e ective vibration ranges at equidistant intervals. The
e ective air bubble removal range is approximately ten
times the diameter of v ib ration head.
Fig.23
Fig.24
NOTICE:
Do not use the tool to move concrete
in the formw ork.
The mortar will just move away
and the coarse aggregate w ill remain, causing
segregation.
Fig.25
Effective leveling and removal of air
bubbles
Remov al of the air b ub b les is complete after y ou hav e
worked the tool throughout each e ective range, the
concrete stops shrinking, and the mortar has risen
evenly to the surface, giving o a light appearance.
Gently remov e the operating tool not to leav e holes.
When using the tool on slope, alw ay s operate it from
the b ottom at the b eginning. If y ou operate the tool from
the top, the mortar w ill separate and ev entually slide to
the b ottom.
Fig.26
Fig.27
NOTE:
Vib rating too long in a single place causes
concrete segregation.
NOTE:
When the coarse aggregate segregates w hen
placing concrete, shov el out the coarse aggregate
and put it w here there is plenty of mortar. T hen use
the tool on it. Don' t leav e coarse aggregate in the
segregated condition.
Fig.28
MAINTENANCE
CAUTION:
Alw ays be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
NOTICE:
Avoid cleaning the tool in w ater.
Water
w ill get into the motor housing and cause motor
failure.
NOTICE:
Use a w et cloth or the like to carefully
wipe off any wet concrete left on the tool after
use. Extra care should be given to thorough
cleaning of the vents, sw itch area, cover open-
ings, etc.
T o maintain product S AFE T Y and RE LIABILIT Y ,
repairs, any other maintenance or adjustment should
b e performed b y Makita Authorized or Factory S erv ice
C enters, alw ay s using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use w ith your Makita tool
specified in this manual.
T he use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If y ou need any assistance for more details regard-
ing these accessories, ask y our local Makita S erv ice
C enter.
ø mm x 1. m flexible shaft
ø mm x 1. m flexible shaft
ø mm x . m flexible shaft
ø 8 mm x 1. m flexible shaft
ø 8 mm x . m flexible shaft
•
Battery case L
•
Battery case H
•
S houlder strap
•
Makita genuine b attery and charger
NOTE:
S ome items in the list may b e included in the
tool package as standard accessories. T hey may
di er from country to country.
Содержание VR001G
