Makita TD0100, Инструкция по эксплуатации

Страница: 6 / 32

6
Adjustable locator with bit (Fig. 9)
To use the adjustable locator with bit, remove the bumper
and then install it. The bumper can be removed by pulling
forward.
For European countries only
Noise
ENG102-1
The typical A-weighted noise level determined according
to EN60745-2-2:
Sound pressure level (L
pA
): 91 dB (A)
Sound power level L
WA
): 102 dB (A)
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration
ENG205-1
The vibration total value (tri-axial vector sum) determined
according to EN60745-2-2:
Work mode: impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
h
): 11.0 m/s
2
Uncertainty (K): 1.5 m/s
2
EC-DECLARATION OF CONFORMITY
ENH101-9
Model; TD0100
We declare under our sole responsibility that this product
is in compliance with the following standards of
standardized documents;
EN60745, EN55014, EN61000 in accordance with
Council Directives, 2004/108/EC, 98/37/EC.
CE 2008
Tomoyasu Kato
Director
Responsible Manufacturer:
Makita Corporation
3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN
Authorized Representative in Europe:
Makita International Europe Ltd.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND