P
5
/
9
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Armature, Spiral bevel gear 11 (cont.)
[3]-2. Skirt section (Spiral bevel gear 35A, Ball bearings, Spindle)
DISASSEMBLING
ASSEMBLING
Flat washer 22
(1) Assemble Armature to Gear housing as illustrated in Fig. 6.
(2) Take the disassembling step in reverse. Refer to Fig. 4, 3, 2.
Assemble Rubber ring 26, Ball bearing 6000DDW
and Flat Washer 22 to Gear housing.
Insert Armature into Ball bearing 6000DDW.
Holding M7 Hex nut with Wrench 11,
turn Armature counterclockwise.
Rubber
ring 26
Ball bearing
6000DDW
Retaining
ring R-30
Fig. 6
Wrench 11
M7 Hex nut
(1) Separate Skirt complete from Gear housing, as illustrated in Figs. 3 and 4.
But no need to separate Gear housing from Motor housing.
(2) Disassemble Gear and spindle from Skirt as illustrated in Fig. 7.
Note: Do not deform Labyrinth ring on Spindle.
Spiral bevel
gear 35A
Ball bearing
696ZZ
Skirt complete
Ring spring 11
1R004
1R269
1R350
Spiral bevel
gear 35A
Spiral bevel
gear 35A
Spindle
Ring spring 11
Remove Ball bearing 696ZZ
as illustrated below.
Remove Spindle with 1R350 and Arbor press.
While opening the cut portion of Ring spring 11 with 1R004,
lift up the Ring spring with screwdriver as illustrated below.
Ring spring 11 can be removed.
Figs. 7
Labyrinth ring
