P
4
/
9
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Armature, Spiral bevel gear 11
DISASSEMBLING
M7 Hex nut
Spray some lubricant
to M7 Hex nut.
Hold M7 Hex nut with wrench 11 and
turn Armature wrapped with cloth
clockwise using water pump pliers.
Water pump
pliers
Cloth to protect Armature
Armature
M7 Hex nut
Wrench 11
Spiral bevel
gear 11
M7 Hex nut
Armature
Armature can be disassembled.
Pay attention not to lose M7 Hex nut and
Spiral bevel gear 11.
Fig. 4-S
Fig. 5
(2-S) If it is difficult to remove Armature by hand;
1) spray some lubricant to M7 Hex nut.
2) turn Armature with water pump pliers while holding M7 Hex nut with wrench 11.
Refer to Fig. 4-S.
(3) Retaining ring R-30, Flat washer 22, Ball bearing 6000DDW and Rubber ring 26 are still left in Gear housing.
They can be disassembled as illustrated in Fig. 5.
Retaining
ring R-30
Flat washer 22
Strike the edge of Gear housing with Plastic hammer.
Ball bearing 6000DDW and Rubber ring 26 come out together with
M7 Hex nut, Spiral bevel gear 11 and Armature.
Remove Retaining ring R-30 and Flat washer 22.
Secure Armature and Spiral bevel gear 11, and then
assemble them to Gear housing using M7 Hex nut.
Spiral bevel gear 11 functions as a tool for removing
Ball bearing 6000DDW at this time.
Wrench 11 for
holding M7 Hex nut
M7 Hex nut
M7 Hex nut
Spiral bevel gear 11
Rubber ring 26
Ball bearing 6000DDW
