![background image](http://html.mh-extra.com/html/makita/m9800-series/m9800-series_instruction-manual_1722846005.webp)
5 ENGLISH
NOTE:
The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE:
The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the pow er tool can differ from the declared
value( s) depending on the w ays in w hich the tool is used especially w hat kind of w orkpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use ( taking account of all parts of the operating cycle such as the
times w hen the tool is sw itched off and w hen it is running idle in addition to the trigger time) .
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to th is instruc tion manual.
SAFETY WARNINGS
General pow er tool safety w arnings
WARNING:
Read all safety w arnings, instruc-
tions, illustrations and specifications provided
w ith this pow er tool.
F ailure to f ollow all instruc tions
listed below may result in electric shock, fire and/or
serious injury.
Save all w arnings and instruc-
tions for future reference.
T h e term " pow er tool" in th e w arnings ref ers to y our
mains-operated (corded) power tool or battery-operated
( c ord less) pow er tool.
Multi tool safety w arnings
1 .
This pow er tool is intended to function for
saw ing, cutting, grinding and sanding. Read all
safety w arnings, instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
2.
Hold the pow er tool by insulated gripping
surfaces, w hen performing an operation w here
the cutting accessory may contact hidden w ir-
ing or its ow n cord.
Cutting accessory contacting
a " liv e" w ire may make ex posed metal parts of th e
pow er tool " liv e" and c ould giv e th e operator an
elec tric sh oc k.
3.
Use clamps or another practical w ay to secure
and support the w orkpiece to a stable plat-
form.
Holding the work by hand or against your
body leaves it unstable and may lead to loss of
c ontrol.
4 .
Position the cord clear of the spinning acces-
sory.
If you lose control, the cord may be cut or
snagged and your hand or arm may be pulled into
th e spinning ac c essory .
5 .
Alw ays use safety glasses or goggles.
Ordinary eye or sun glasses are NOT safety
glasses.
6 .
Avoid cutting nails. Inspect w orkpiece for any
nails and remove them before operation.
7.
Hold the tool firmly.
8 .
Make sure the application tool is not contact-
ing the w orkpiece before the sw itch is turned
on.
9 .
Keep hands aw ay from moving parts.
1 0.
Do not leave the tool running. Operate the tool
only w hen hand-held.
1 1 .
Alw ays sw itch off and w ait for the blade to
come to a complete stop before removing the
blade from the w orkpiece.
1 2.
Do not touch the application tool or the w ork-
piece immediately after operation; they may be
extremely hot and could burn your skin.
1 3.
Do not operate the tool at no-load
unnecessarily.
1 4 .
Alw ays use the correct dust mask/respirator
for the material and application you are w ork-
ing w ith.
1 5 .
Some material contains chemicals w hich may
be toxic. Take caution to prevent dust inhala-
tion and skin contact. Follow material supplier
safety data.
1 6 .
This tool has not been w aterproofed, so do not
use w ater on the w orkpiece surface.
1 7.
Ventilate your w ork area adequately w hen you
perform sanding operations.
1 8 .
Use of this tool to sand some products, e.g.
leaded paint surfaces, w ood and metals could
expose user and bystanders to dust contain-
ing hazardous substances. Use appropriate
respiratory protection.
1 9 .
Be sure that there are no cracks or breakage
on the pad before use. Cracks or breakage
may cause a personal injury.
20.
Do not use accessories which are not specifi
-
cally designed and recommended by the tool
manufacturer. Just because the accessory
can be attached to your pow er tool, it does not
assure safe operation.
21 .
Wear personal protective equipment.
Depending on application, use face shield,
safety goggles or safety glasses. As appro-
priate, w ear hearing protectors, gloves and
w orkshop apron capable of stopping small
abrasive or w orkpiece fragments.
T h e ey e pro-
tection must be capable of stopping flying debris
generated by various operations . The dust mask
or respirator must be capable of filtrating particles
generated by your operation. Prolonged exposure
to h igh intensity noise may c ause h earing loss.