5-3-4
Vise Section
5-3-4-1
Disassembling
Fig. 4-1
1)
Remove two M8x30 PH Screw (70) with No.3
phillips Bit and Cordless impact driver. Remove Pin
16 (89) by sliding Vise Ass’y (119).
No.3 phillips Bit
M8x30 PH Screw (70)
(2 pcs.)
Pin 16 (89)
Remove at this point.
3)
Chain should be fixed to Screw guide (67) to
clamp main body as the below photos.
Projection
Screw guide (67)
Chain (64)
M8x30 Pan head
Screw (70)
Fig. 4-3
3)
Put Vise on IR258. Remove Spring pin 5-36 (68) and
Spring pin 4-16 (69) with1R308 and 1R309.
IR 309
IR 258
Fig. 4-4
4)
The component of Vise section (119) is as follows.
Remove Plate (66) by
prying it off with a slotted
screwdriver.
Note:
Plate (66) is
non-directional
Plate (66)
Screw guide (67)
Handle 120 (59)
Vise screw (60)
Vise nut (65)
Note:
Directional
**Spring pin 5-36 (68)
*Spring pin 4-16 (69)
* with 1R308 to assemble
** with 1R309 to assemble
Fig. 4-2 (only LW1401)
**Spring pin
5-20 (58)
Makita Corporation
8
/
15