4
ENGLISH
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-6
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
.... Read instruction manual.
.............. DOUBLE INSULATION
ENE042-1
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood, metal,
ceramic and plastic.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1.
Keep work area clean and well lit.
Cluttered or dark
areas invite accidents.
2.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes.
3.
Keep children and bystanders away while
operating a power tool.
Distractions can cause you
to lose control.
Electrical safety
4.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
5.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
1.
Switch trigger
2.
Lock button
3.
Lamp
4.
Reversing switch lever
5.
Action mode changing knob
6.
Grip base
7.
Side grip
8.
Loosen
9.
Tighten
10. Teeth
11. Protrusion
12. Bit shank
13. Bit grease
14. Bit
15. Chuck cover
16. Depth gauge
17. Dust cup
18. Blow-out bulb
19. Chuck adapter
20. Keyless drill chuck
21. Sleeve
22. Ring
Model
HR2460/HR2460F
Capacities
Concrete
Tungsten-carbide tipped bit
24 mm
Core bit
54 mm
Diamond core bit (dry type)
65 mm
Steel
13 mm
Wood
32 mm
No load speed (min
-1
)
0 - 1,100
Blows per minute
0 - 4,500
Overall length
362 mm
Net weight
2.8 kg
Safety class
/II
