4 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
HP488D
Drilling capacities
Masonry
13 mm
Steel
13 mm
Wood
36 mm
Fastening capacities
Wood screw
6 mm x 75 mm
Machine screw
M6
No load speed
High (2)
0 - 1,400 min
-1
Low (1)
0 - 400 min
-1
Blows per minute
High (2)
0 - 21,000 min
-1
Low (1)
0 - 6,000 min
-1
Overall length
239 mm
Rated voltage
D.C. 18 V
Net weight
1.8 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change without notice.
•
Specifications may differ from country to country.
•
Weight, with battery cartridge, according to EPTA-Procedure 01/2014
Applicable battery cartridge and charger
Battery cartridge
BL1815G
Charger
DC18WA
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for impact drilling in brick, brickwork
and masonry. It is also suitable for screw driving and
drilling without impact in wood, metal, ceramic and
plastic.
Noise
The typical A-weighted noise level determined accord
-
ing to EN62841-2-1:
Sound pressure level (L
pA
) : 81 dB(A)
Sound power level (L
WA
) : 92 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE:
The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE:
The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the tool is
used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched off and when
it is running idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter
-
mined according to EN62841-2-1:
Work mode: impact drilling into concrete
Vibration emission (a
h,ID
) : 9.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: drilling into metal
Vibration emission (a
h,D
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
NOTE:
The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE:
The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
Содержание HP488D
Страница 2: ...1 2 3 Fig 1 1 Fig 2 1 A B Fig 3 1 Fig 4 ᵏ ᵐ ᵒ ᵔ 1 2 3 Fig 5 ᵏ ᵐ ᵒ ᵔ 1 2 3 Fig 6 1 2 3 Fig 7 Fig 8 2 ...
Страница 3: ...1 Fig 9 3 ...
Страница 67: ...67 ...
