P 12/ 20
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Gear assembly, Motor section
Fig. 24
2. Join Motor section with Gear assembly (11).
See
Fig. 25
.
3. Set Motor section and Gear assembly
entirely to Housing set L (17), by fitting
the notch of Stator to the protruded
portion of housing set L (17).
See
Fig. 26
.
1. Insert Rotor (15) into Stator (14) while being careful to the following
points.
* Hold the Fan portion to avoid pinching your finger with Rotor fan
and edge of Stator.
* Insert Rotor into Stator slowly and vertically, to avoid scratching
and damage to wiring board of Stator
See
Fig. 24
.
ASSEMBLING
(14)
(15)
Fig. 25
Fig. 26
Motor section
(11)
(14)
(11)
(17)
Notch of Stator
Protruded portion
of Housing set L
