Makita GN420CLSE, Инструкция по эксплуатации

Страница: 4 / 72

4
ENGLISH (Original instructions)
Explanation of general view
1-1. Battery cartridge
2-1. Battery cartridge
2-2. Button
3-1. Lamp button
4-1. Metering valve
4-2. Cap
8-1. Jet nozzle
11-1. Adjuster 12-1. Hook
13-1. Button
14-1. Pusher lever
15-1. Pusher lever
15-2. Nail stopper
16-1. Bolt
18-1. Trigger
19-1. Thin steel plate 19-2. Penetration amount into concrete
20-1. Magazine
22-1. Under driver guide
22-2. Bolt
25-1. Filter cover
25-2. Filter
SPECIFICATIONS
Model GN420C
Nail capacity 20 nails (2strips) 40 nails (4strips)
Dimensions (L X W X H) 315 mm X 108 mm X 390 mm 430 mm X 108 mm X 390 mm
Net weight 3.6 kg 3.8 kg
Nail length X Shank diameter Nail L :15 mm - 40 mm d : 2.6 mm - 3.1 mm
Rated voltage D.C. 7.2 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END107-5
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Container under pressure, keep away
from temperatures over 50°C (for ex.
sun radiation) Keep container in a well
ventilated place.
･
Use only outside or well ventilated
rooms. Do not breathe gas.
･
Do not use near flames or sprays on
heated surfaces. In use, may form
flammable/explosive vapour-air mixture.
･
Do not damage, puncture or burn even
after use.
･
Wear safety glasses.
･
Keep fingers away from trigger when
not driving fasteners to avoid accidental
firing.
･
Use only in ventilated area to avoid
nausea and unconsciousness. Never
use tool in combustible atmospheres.
The tool exhaust may ignite flammable
materials.
･
Do not use on scaffoldings, ladders.
･
Warning: hot surface!
Do not touch around this symbol.
Touching the surface may cause burns
or injuries.
･
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE072-1
Intended use
The tool is intended for securing a thin steel plate to the
concrete.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN792:
Sound pressure level (L
pA
) : 89 dB(A)
Sound power level (L
WA
) : 102 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
Cd
Ni-MH
Li-ion