4 ENGLISH
ADDITIONAL
SAFETY RULES
1.
Read this instruction manual and
the charger instruction manual care-
fully before use.
2.
Do not vacuum the following:
•
Flammable liquid (kerosene,
gasoline, solvents such as ben-
zine, thinner, etc.)
•
Hot substances that are burning
or smoking (cigarettes, matches,
incense sticks, candles, hot ashes),
sparks and metal dust generated by
cutting or grinding metal, etc.
•
Flammable material (toner,
paint, spray, etc.)
•
Foam like carpet cleaning agent, etc.
(they may cause explosion or fire)
•
Explosive or pyrophoric sub-
stances (nitroglycerin, alumi-
num, magnesium, titanium, zinc,
red phosphorus, yellow phos-
phorus, celluloid, etc. and their
dust, gas or steam)
•
Sharp objects (glass, cutlery,
wood splinter, metal, stone, nail,
razor, push pin, etc.)
•
Solidifying and conductive fine
powder (metal or carbon powder)
•
Dehumidifier
•
Large amount of powder (flour,
fire extinguisher powder, etc.)
•
Substances that cause toxic
symptoms
•
Aggressive chemicals (acid, alkali, etc.)
•
Liquid or damp garbage, includ-
ing vomit and excreta
•
Asbestos
•
Pesticides
Such action may cause fire, injury
and/or property damage.
To reduce your exposure to these
chemicals, always wear approved
respiratory protection such as dust
masks that are specially designed
to filter out microscopic particles.
Direct the exhaust air away from
your face and body.
NOTE: Read the OSHA regulation
on silica dust to understand the
requirements needed to reduce
exposure to silica dust at the job-
site. Specific rules apply to the drill
-
ing, demolition cutting and grinding
materials that contain silica. All
OSHA requirements regarding
reducing silica dust can be found at
the OSHA website: www.osha.gov.
3.
Stop operation immediately if you
notice anything abnormal.
4.
If you drop or strike the cleaner,
check it carefully for cracks or dam-
age before operation.
5.
Do not bring close to stoves or other
heat sources.
6.
Do not block the intake hole or vent
holes.
Symbols
The followings show the symbols used for tool.
volts
direct current
Important safety
instructions for
battery cartridge
1.
Before using battery cartridge,
read all instructions and cautionary
markings on (1) battery charger,
(2) battery, and (3) product using
battery.
2.
Do not disassemble or tamper with
the battery cartridge.
It may result in
a fire, excessive heat, or explosion.
3.
If operating time has become
excessively shorter, stop operating
immediately. It may result in a risk
of overheating, possible burns and
even an explosion.
4.
If electrolyte gets into your eyes,
rinse them out with clear water and
seek medical attention right away. It
may result in loss of your eyesight.