10 ENGLISH
NOTE:
When moving the cleaner, make sure that the
caster is unlocked. Moving the cleaner with the caster
in a locked position may cause damage to the caster.
Carriage handle
CAUTION:
Lift and carry the appliance with
due care.
Failing to do so may result in personal
injury or damage to the appliance.
When carrying the cleaner, carry it by holding the han-
dle on the head unit. The handle is retractable on the
head unit when not in use.
Fig.10
ASSEMBLY
CAUTION:
Always be sure that the appliance
is switched off and the battery cartridges are
removed before carrying out any work on the
appliance.
CAUTION:
Always wear dust mask during
assembly or maintenance.
Installing powder filter (HEPA) and
prefilter (for dry dust)
CAUTION:
Never pick up water or other liq-
uids or wet dusts when using the powder filter.
Picking up such things may cause the powder filter
breakage.
To use powder filter:
1.
Place the prefilter into the tank aligning the mount-
ing position markings on the prefilter and tank.
2.
Set the damper into the prefilter, and then place
the powder filter over the damper aligning the mounting
position markings on the powder filter and prefilter.
3.
Mount the head unit over the tank and secure
them with the locking latches.
1
2
3
4
5
6
6
6
Fig.11
►
1.
Head unit
2.
Powder filter (HEPA)
3.
Damper
4.
Prefilter
5.
Tank
6.
Mounting position marking
NOTICE:
Before using the powder filter, make
sure that prefilter and damper are used together.
It
is not allowed to install powder filter alone.
Installing paper pack
Optional accessory
WARNING:
Before using a paper pack, make
sure that the prefilter is used together.
Failure to
use the prefilter together may cause unusual noise
and heat, resulting in a fire.
NOTICE:
Never pick up water or other liquids
or wet dusts when using a paper pack.
Picking up
such things may cause the paper pack breakage.
NOTICE:
Before using a paper pack, make sure
that the powder filter, damper and prefilter are
always used together.
1.
Unfold a paper pack.
2.
Align the paper pack opening with the dust intake
of the tank.