P 14/ 35
(7) Remove Air cleaner cover and Air cleaner element and then loosen two M5x60 Pan head screws (l) securing Carburetor. (
Fig. 51
)
Do not remove them. Leave them inserted for easier assembling. (
Fig. 25
)
(8) Remove Air cleaner case and Carburetor and move them a little out of the way as shown in
Fig. 25
and then remove two M5x25 Hex
socket head bolts securing Insulator with 1R229. At this time, do not loosen the lower hex socket head bolt. (
Fig. 25
)
(9) Remove Plug cap (m) and then disconnect the two tubes (n) with 1R311. (
Fig. 26
)
(10) Loosen two M5x30 Hex socket head bolts (o) and remove Rocker cover complete (p). Loosen five M6x35 Socket head bolts (r) of
Cylinder head complete (q). (
Fig. 27
)
(q)
(r) 5 pcs.
Remove (p) first.
(o)
(o)
Do not loosen
this hex socket head bolt.
Leave (l) inserted.
Do not remove them.
1R311
(m)
(n)
Fig. 25
Fig. 26
Fig. 27
Makita Corporation
