Makita EB7650TH, Техническая информация, Страница: 10 / 35

P 10/ 35
[3]-3. Throttle Lever Section
EB7650TH
Disassembly
(1) Remove M5x30 thumb screw (a). ( Fig. 15 )
(2) Loosen five 4x18 Tapping screws and then remove Lever case R (b). ( Fig. 15 )
(3) Remove the head of Control cable (c) from Throttle lever A (d) and then remove the lever. ( Fig. 15 )
(4) Remove Throttle link (e), disconnect the connector of Switch unit, and then replace Switch unit.
(5) Loosen M4x18 Hex socket head bolt and remove Throttle lever B (f). ( Fig. 16 )
Assembly
・
Attach Throttle link (e) at the position shown in Fig. 16 . First secure Throttle lever B (f) with the screw and then turn it counterclockwise
(viewed from the inside) to press the lever of Switch unit and then attach Throttle lever A (d).
(e)
(f) is on the back.
(a)
(b)
(d)
(c) (d)
Lever case L
Switch unit
Fig. 15
Fig. 16
Makita Corporation