Makita DVC860L, Инструкция по эксплуатации, Страница: 9 / 112

9
Press the check button to make the battery indicators
show the remaining battery capacities. The battery
indicators correspond to each battery.
Remaining battery capacity indication
Battery indicator status
Remaining battery capacity
50% - 100%
20% - 50%
0% - 20%
Charge the battery
On Off
Blinking
015527
Indicating the remaining battery capacity
(Only for battery cartridges with "B" at the end of the
model number.)
Fig.6
Press the check button on the battery cartridge to
indicate the remaining battery capacity. The indicator
lamps light up for few seconds.
Off Blinking Lighted
Indicator lamps
Charge the
battery.
0% to 25%
25% to 50%
50% to 75%
75% to 100%
Remaining
capacity
The battery
may have
malfunctioned.
015658
NOTE:
•
Depending on the conditions of use and the
ambient temperature, the indication may differ
slightly from the actual capacity.
Switch action
Fig.7
To start the cleaner:
1. Set the stand-by switch to the "I" side. The
cleaner gets into stand-by state.
2. Press the power button.
To make the cleaner get into stand-by mode, press the
power button again.
To turn off the cleaner, set the stand-by switch to the "O"
side.
The suction power can be adjusted according to your
work need.
Suction power can be increased by turning the suction
force adjusting knob from the
symbol to the
symbol.
NOTICE:
•
Always set the stand-by switch to the "O" side
when not using the cleaner for long time. The
cleaner consumes power during stand-by state.
Auto-suction stop during wet suction
operation (for the cloth filter model)
WARNING:
•
Do not use for a long time while the float is at
work.
Using the cleaner with its float at work for a
long time can cause overheat, resulting in the
cleaner deformation.
•
Do not pick up foam or soapy liquid. Picking up
foam or soapy liquid can cause foam to come out
of air exit before the float works. Continuing to
using in this condition may cause an electric shock
and breakage of the cleaner.
Auto-suction stop works only when using with the float
and float cage.
The cleaner has a float mechanism that prevents water
from immersing into the motor when picking up more
than a certain amount of water.
When the tank is full and the cleaner no longer picks up
water, switch off the cleaner and empty the tank.
Locking or unlocking the caster
Fig.8
To lock the caster with a stopper, lower the stopper lever
and the caster no longer will rotate. To release the
caster from the locked position, raise the stopper lever.
Locking the caster is convenient when storing the
cleaner, stopping the work on the way and keeping the
cleaner still.
To operate the stopper, move it by hand.
NOTE:
•
When moving the cleaner, make sure that the
caster is unlocked. Moving the cleaner with the
caster in the locked position may cause damage to
the caster.
Carriage handle
Fig.9
When carrying the cleaner, carry it by holding the
handle on the head. The handle is retractable at the
head when not in use.