8 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
UR100D
No load speed
(without cutting tool)
10,000 min
-1
Overall length
(without cutting tool)
835 - 1,185 mm
Nylon cord diameter
1.65 mm
Applicable cutting tool and
cutting diameter
Nylon cutting head
(P/N 198852-2 / 198853-0)
260 mm
Plastic blade head
(P/N 198847-5 / 198848-3)
230 mm
Rated voltage
D.C. 10.8 V - 12 V max
Standard battery cartridge
BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
Net weight
1.9 - 2.1 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications and battery cartridge may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Noise
Applicable standard : EN50636
Type
Sound pressure level average
L
PA
(dB(A))
Uncertainty K (dB(A))
Nylon cutting head
74
0.74
Plastic blade
75.8
2.84
•
Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB
(A). Wear ear protection.
Vibration
Applicable standard : EN50636
Type
Left hand
Right hand
a
h,W
(m/s
2
)
Uncertainty K (m/s
2
)
a
h,W
(m/s
2
)
Uncertainty K (m/s
2
)
Nylon cutting head
2.5
0.1
2.5
0.5
Plastic blade
2.5
0.1
2.5
0.1
NOTE:
The declared vibration emission value has been measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE:
The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in addition to the trigger time).
Содержание DUR181Z
