![background image](http://html1.mh-extra.com/html/makita/dup180/dup180_instruction-manual_4296474011.webp)
11 ENGLISH
15.
Do not touch the terminal of the tool immediately
after use as it may get hot enough to cause burns.
16.
Do not allow chips, dust, or soil stuck into the
terminals, holes, and grooves of the battery
cartridge.
It may cause heating, catching fire,
burst and malfunction of the tool or battery car
-
tridge, resulting in burns or personal injury.
17.
Unless the tool supports the use near
high-voltage electrical power lines, do not use
the battery cartridge near high-voltage electri-
cal power lines.
It may result in a malfunction or
breakdown of the tool or battery cartridge.
18.
Keep the battery away from children.
SAVE THESE INSTRUCTIONS.
CAUTION:
Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
causing fires, personal injury and damage. It will also
void the Makita warranty for the Makita tool and charger.
Tips for maintaining maximum
battery life
1.
Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2.
Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3.
Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
4.
When not using the battery cartridge, remove
it from the tool or the charger.
5.
Charge the battery cartridge if you do not use
it for a long period (more than six months).
PARTS DESCRIPTION
►
Fig.1
1
Shear blade
2
Indicator lamps
3
Angle adjustment button
4
Main power button
5
Battery cartridge
6
Switch trigger
7
Battery adapter
8
Holster
9
Waist belt (available in the market)
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before adjusting or checking function on the tool.
Installing the connection cord
First, align the triangular mark of the female socket of
the connection cord with the triangular mark of the male
connector of the tool. Push in the socket of the connec-
tion cord to the connector of the tool. Then, align the
marking on the coupling with the triangular marks, and
push in and turn the coupling to tighten.
►
Fig.2:
1.
Triangular mark
2.
Connection cord
3.
Tool
4.
Marking on coupling
5.
Coupling
NOTICE:
Turn the coupling and align the mark-
ing on the coupling with the triangular marks first
when disconnecting the connection cord.
Installing or removing battery
cartridge
CAUTION:
Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION:
Hold the battery adapter and the
battery cartridge firmly when installing or remov
-
ing battery cartridge.
Failure to hold the battery
adapter and the battery cartridge firmly may cause
them to slip off your hands and result in damage to
the tool, battery adapter and battery cartridge and a
personal injury.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator as
shown in the figure, it is not locked completely.
To remove the battery cartridge, slide it from the battery
adapter while sliding the button on the front of the cartridge.
CAUTION:
Always install the battery cartridge
fully until the red indicator cannot be seen.
If not,
it may accidentally fall out of the tool, causing injury to
you or someone around you.
CAUTION:
Do not install the battery cartridge
forcibly.
If the cartridge does not slide in easily, it is
not being inserted correctly.
►
Fig.3:
1.
Red indicator
2.
Button
3.
Battery cartridge
4.
Battery adapter
Содержание DUP180
