![background image](http://html1.mh-extra.com/html/makita/duh551rf2/duh551rf2_instruction-manual_4144972005.webp)
5
ENGLISH (Original instructions)
Explanation of general view
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Battery indicator
4-1. Knob
4-2. Housing
5-1. Switch trigger B
5-2. Switch trigger A
5-3. Lock-off button
6-1. Adjusting dial
9-1. Trimming direction
9-2. Hedge surface to be trimmed
9-3. Tilt the blades.
14-1. Press
14-2. Chip receiver
14-3. Nut
14-4. Shear blade
15-1. Nut
15-2. Branch catcher
16-1. Hooks
16-2. Fit the hooks into groove
16-3. Grooves
17-1. Press the levers on both sides
17-2. Unlock the hooks
18-1. Blade cover
18-2. Screws
19-1. Under cover
19-2. Blade cover
19-3. Screws
20-1. Plate
21-1. Crank
22-1. Screws
22-2. Shear blade
23-1. Crank
24-1. Oval hole of shear blade
26-1. Oval hole of shear blade
26-2. Crank
26-3. Screws
27-1. Crank
28-1. Limit mark
29-1. Holder cap cover
29-2. Slotted screwdriver
30-1. Brush holder cap
30-2. Slotted screwdriver
SPECIFICATIONS
Model DUH551
DUH651
Blade length
550mm
650 mm
Strokes per minute (min
-1
)
1,000 - 1,800
Overall length
1,065 mm
1,135 mm
Rated voltage
D.C. 36 V
Net weight
5.1 kg
5.2 kg
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Noise
Sound pressure level
Sound power level
Model L
PA
(dB (A))
Uncertainty K
(dB (A))
L
PA
(dB (A))
Uncertainty K
(dB (A))
Applicable
standard or
directive
DUH551 81.5
2.1
91
1.5
DUH651 82
1.4
91.1
1.5
2000/14/EC
• Wear ear protection.
Vibration
Model
Declared emission (m/s
2
)
Uncertainty K (m/s
2
)
Applicable standard
or directive
DUH551 / DUH651
2.5 1.5
EN60745
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).