![Makita DUB184 Скачать руководство пользователя страница 9](http://html.mh-extra.com/html/makita/dub184/dub184_instruction-manual_222797009.webp)
9
ENGLISH
OPERATION
CAUTION:
Do not place the machine on the
ground hile it is s itched on.
Sand or dust may
enter f rom suc tion inlet and c ause a malf unc tion or
personal injury.
Hold the machine firmly with a hand and perform the
blowing operation by moving it around slowly. When
blowing around building, big stone or vehicle, direct the
nozzle away from them. When performing an operation
in a c orner, start f rom th e c orner and th en mov e to w id e
area.
Fig.12
MAINTENANCE
CAUTION:
Al ays be sure that the machine is
s itched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Cleaning the machine
Clean the machine by wiping off dust with a dry cloth or
one dipped in soapy water and wrung out.
Fig.13
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
R emov e d ust or d irt f rom th e suc tion inlet at th e rear of
th e mac h ine.
Fig.14:
1.
S uc tion inlet
Storage
The hook hole on the bottom of the machine is conve
-
nient f or h anging th e mac h ine f rom a nail or sc rew on
th e w all. S tore th e mac h ine in a plac e out of th e reac h
of c h ild ren and not ex posed to moisture or rain.
Fig.15:
1.
H ole
TROUBLESHOOTING
Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the man
-
ual, do not attempt to dismantle the machine. Instead, ask Makita Authorized Service Centers, always using Makita
replac ement parts f or repairs.
State of abnormality
Probable cause (malfunction)
Remedy
Motor d oes not run.
Battery cartridge is not installed.
Install the battery cartridge.
Battery problem (under voltage)
Recharge the battery. If recharging is not effective,
replace battery.
The drive system does not work
correctly.
Ask your local authorized service center for repair.
Motor stops running af ter a little use.
Battery s charge level is low.
Recharge the battery. If recharging is not effective,
replace battery.
O v erh eating.
S top using th e mac h ine to allow it to c ool d ow n.
T h e mac h ine d oes not reac h th e
max imum speed .
Battery is installed improperly.
Install the battery cartridge as described in this
manual.
Battery power is dropping.
Recharge the battery. If recharging is not effective,
replace battery.
The drive system does not work
correctly.
Ask your local authorized service center for repair.
Abnormal vibration:
stop the machine immediately
The drive system does not work
correctly.
Ask your local authorized service center for repair.
Motor cannot stop:
Remove the battery immediately
Electric or electronic malfunction.
Remove the battery and ask your local authorized
serv ic e c enter f or repair.
Содержание DUB184
