![background image](http://html1.mh-extra.com/html/makita/dtm50z/dtm50z_instruction-manual_4126063004.webp)
4 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model
DTM40
DTM50
Oscillation per minute
6,000 - 20,000 (min
-1
)
Oscillation angle, left/right
1.6 ° (3.2 ° total)
Overall length
307 - 324 mm
Net weight
1.7 - 2.0 kg
1.8 - 2.2 kg
Rated voltage
D.C. 14.4 V
D.C. 18 V
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
D.C.14.4 V Model
BL1415N / BL1430 / BL1430B / BL1440 / BL1450 / BL1460B
D.C.18 V Model
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Intended use
The tool is intended for sawing and cutting wood,
plastic, gypsum, non-ferrous metals, and fastening
elements (e. g. unhardened nails and staples). It is also
intended for working soft wall tiles, as well as dry sand
-
ing and scraping of small surfaces. It is especially for
working close to edge and flush cutting.
Noise
The typical A-weighted noise level determined accord
-
ing to EN62841:
Work mode: Sanding
Sound pressure level (L
pA
) : 78 dB (A)
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Work mode: Cutting with plunge cut saw blade
Model DTM40
Sound pressure level (L
pA
) : 82 dB (A)
Sound power level (L
WA
) : 93 dB (A)
Uncertainty (K) : 3 dB (A)
Model DTM50
Sound pressure level (L
pA
) : 84 dB (A)
Sound power level (L
WA
) : 95 dB (A)
Uncertainty (K) : 3 dB (A)
Work mode: Cutting with segmental saw blade
Sound pressure level (L
pA
) : 81 dB (A)
Sound power level (L
WA
) : 92 dB (A)
Uncertainty (K) : 3 dB (A)
Work mode: Scraping
Model DTM40
Sound pressure level (L
pA
) : 81 dB (A)
Sound power level (L
WA
) : 92 dB (A)
Uncertainty (K) : 3 dB (A)
Model DTM50
Sound pressure level (L
pA
) : 83 dB (A)
Sound power level (L
WA
) : 94 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) deter
-
mined according to EN62841:
Work mode: Sanding
Vibration emission (a
h
) : 2.5 m/s
2
or less
Uncertainty (K) : 1.5 m/s
2
Work mode: Cutting with plunge cut saw blade
Model DTM40
Vibration emission (a
h
) : 9.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model DTM50
Vibration emission (a
h
) : 10.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: Cutting with segmental saw blade
Model DTM40
Vibration emission (a
h
) : 5.0 m/s
2
Uncertainty (K) : 1.5 m/s
2
Содержание DTM50Z
