![background image](http://html1.mh-extra.com/html/makita/dtm50z/dtm50z_instruction-manual_4126063005.webp)
5 ENGLISH
Model DTM50
Vibration emission (a
h
) : 5.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Work mode: Scraping
Model DTM40
Vibration emission (a
h
) : 7.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model DTM50
Vibration emission (a
h
) : 9.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
NOTE:
The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE:
The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima
-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool.
Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
CORDLESS MULTI TOOL SAFETY
WARNINGS
1.
This power tool is intended to function for
sawing, cutting, grinding and sanding. Read all
safety warnings, instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
2.
Hold power tool by insulated gripping sur-
faces, when performing an operation where the
cutting accessory may contact hidden wiring.
Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
3.
Use clamps or another practical way to secure
and support the workpiece to a stable plat-
form.
Holding the work by hand or against your
body leaves it unstable and may lead to loss of
control.
4.
Always use safety glasses or goggles.
Ordinary eye or sun glasses are NOT safety
glasses.
5.
Avoid cutting nails. Inspect workpiece for any
nails and remove them before operation.
6.
Hold the tool firmly.
7.
Make sure the application tool is not contacting
the workpiece before the switch is turned on.
8.
Keep hands away from moving parts.
9.
Do not leave the tool running. Operate the tool
only when hand-held.
10.
Always switch off and wait for the blade to
come to a complete stop before removing the
blade from the workpiece.
11.
Do not touch the application tool or the work-
piece immediately after operation; they may be
extremely hot and could burn your skin.
12.
Do not operate the tool at no-load
unnecessarily.
13.
Always use the correct dust mask/respirator
for the material and application you are work-
ing with.
14.
Some material contains chemicals which may
be toxic. Take caution to prevent dust inhala-
tion and skin contact. Follow material supplier
safety data.
15.
This tool has not been waterproofed, so do not
use water on the workpiece surface.
16.
Ventilate your work area adequately when you
perform sanding operations.
17.
Use of this tool to sand some products, paints
and wood could expose user to dust contain-
ing hazardous substances. Use appropriate
respiratory protection.
18.
Be sure that there are no cracks or breakage
on the pad before use. Cracks or breakage
may cause a personal injury.
19.
Do not use accessories which are not specifi
-
cally designed and recommended by the tool
manufacturer.
Just because the accessory can
be attached to your power tool, it does not assure
safe operation.
20.
Wear personal protective equipment.
Depending on application, use face shield,
safety goggles or safety glasses. As appro-
priate, wear hearing protectors, gloves and
workshop apron capable of stopping small
abrasive or workpiece fragments.
The eye pro
-
tection must be capable of stopping flying debris
generated by various operations . The dust mask
or respirator must be capable of filtrating particles
generated by your operation. Prolonged exposure
to high intensity noise may cause hearing loss.
Содержание DTM50Z
