![background image](http://html1.mh-extra.com/html/makita/dtm41/dtm41_technical-information_4128735003.webp)
P
3
/ 1
2
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Armature
DISASSEMBLING
1. Separate Battery housing R/ L from Motor housing
by unscrewing two 4x20 Tapping screws.
2. Separate Cushion rubbers from Motor
housing.
3. Separate Handle cover complete by unscrewing
four 3x16 Tapping screws.
4. Disconnect Carbon brushes from Armature’s
commutator by pulling off Brush holders.
Handle cover
complete
Cushion rubber
(1) For disassembling Armature, remove Battery housing R/L, Handle cover, Lower/ Upper head covers etc.
as drawn in
Fig. 2
.
Brush holder
Line filter
Brush holder
Lock
position
Release
position
Lever
Lower head cover
6. Remove Lower head cover by unscrewing
two 4x20 Tapping screws.
Holder bolt
Upper head cover
Lever
7. Return Lever a little to the lock position, then remove Upper head cover.
5. Shift Lever fully to the release position from
the lock position, then pull off Holder bolt.
Fig. 2
Battery housing R
Battery housing L