Makita DTD134RTJ, Инструкция по эксплуатации

Страница: 4 / 56

4
ENGLISH
(Original instructions)
Explanation of general view
1 Red indicator
2 Button
3 Battery cartridge
4 Star mark
5 Indicator lamps
6 Check button
7 Switch trigger
8 Lamp
9 Reversing switch lever
10 LED indicator
11 Bit
12 Sleeve
13 Bit-piece
14 Hook
15 Screw
16 Standard bolt
17 Fastening torque
18 Proper fastening torque
19 Fastening time
20 High tensile bolt
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of resi-
dence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
ENE033-1
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
GEA010-2
General Power Tool Safety Warnings
WARNING Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool.
Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
GEB137-1
CORDLESS IMPACT DRIVER SAFETY
WARNINGS
1. Hold the power tool by insulated gripping sur-
faces, when performing an operation where the
fastener may contact hidden wiring.
Fasteners
contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give the oper-
ator an electric shock.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
3. Hold the tool firmly.
4. Wear ear protectors.
5. Do not touch the bit or the workpiece immedi-
ately after operation. They may be extremely hot
and could burn your skin.
6. Keep hands away from rotating parts.
Model DTD134 DTD146
Capacities
Machine screw 4 mm – 8 mm
Standard bolt 5 mm – 14 mm
High tensile bolt 5 mm – 12 mm
No load speed (min
–1
) 0 – 2,400 0 – 2,300
Impacts per minute 0 – 3,200
Overall length 138 mm
Rated voltage D.C. 14.4 V D.C. 18 V
Net weight 1.2 – 1.4 kg 1.3 – 1.6 kg
Battery cartridge
D.C. 14.4 V Model BL1415N / BL1430 / BL1430B / BL1440 / BL1450 / BL1460B
D.C. 18 V Model
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF