10 ENGLISH
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
X;[)<\ ;$$]<X/(X;[)< ()^ <.*_;`_(X;[)< ./[q;^*^
with this power tool.
G
M +
Save all warnings and instruc-
tions for future reference.
U U
& ! " &
(cordless) power tool.
Cordless drywall sander safety warnings
Safety Warnings Common for Sanding Operations:
1.
This power tool is intended to function as a sander.
Read all safety warnings, instructions, illustrations
()^ <.*_;`_(X;[)< ./[q;^*^ z;X{ X{;< .[z*/ X[[$|
G
M +
2.
Operations such as grinding, wire brushing,
polishing or cutting-off are not recommended
to be performed with this power tool.
Operations
X
3.
}[ )[X ]<* (__*<<[/;*< z{;_{ (/* )[X <.*_;`_($$~
designed and recommended by the tool manufac-
turer.
Y
4.
The rated speed of the accessory must be at
least equal to the maximum speed marked on
the power tool.
%
MZ
5.
The outside diameter and the thickness of your
accessory must be within the capacity rating
of your power tool.
[ X
\
@
Do not use a damaged accessory. Before each
use inspect the accessory such as pad for cracks,
tear or excess wear. If power tool or accessory is
dropped, inspect for damage or install an undam-
aged accessory. After inspecting and installing
an accessory, position yourself and bystanders
away from the plane of the rotating accessory and
run the power tool at maximum no-load speed
for one minute.
M
7.
Wear personal protective equipment.
Depending on application, use face shield,
safety goggles or safety glasses. As appro-
priate, wear dust mask, hearing protectors,
gloves and workshop apron capable of stop-
ping small abrasive or workpiece fragments.
Z
M
$ O
cause hearing loss.
8.
Keep bystanders a safe distance away from work
area. Anyone entering the work area must wear
personal protective equipment.
G
M M Z
9.
Position the cord clear of the spinning acces-
sory.
[
10.
Never lay the power tool down until the acces-
sory has come to a complete stop.
The spinning
11.
Do not run the power tool while carrying it at
your side.
%
12.
}[ )[X [.*/(X* X{* .[z*/ X[[$ )*(/ (,,($*
materials.
Sparks could ignite these materials.
13.
Do not use accessories that require liquid
coolants.
H \
M
Kickback and Related Warnings
KMM -
$
-
^
G O
workpiece, the edge of the pad that is entering into the
pinch point can dig into the surface of the material caus-
MM
^
$ M
KMM +
M
1.
:(;)X(;) ( `/, /;. [) X{* .[z*/ X[[$ ()^ .[<;X;[)
your body and arm to allow you to resist kickback
forces. Always use auxiliary handle, if provided, for
maximum control over kickback or torque reaction
during start-up.
\ -
MMM M
2.
Never place your hand near the rotating acces-
sory.
% MMM
3.
Do not position your body in the area where
power tool will move if kickback occurs.
KMM
^
4.
Use special care when working corners, sharp
edges etc. Avoid bouncing and snagging the
accessory.
E
MMM
5.
Do not attach a saw chain woodcarving blade
or toothed saw blade.
-
\MMM
(*X~ (/);)< .*_;`_ [/ ()^;) .*/(X;[)<
1.
Do not use excessively oversized sanding
disc paper. Follow manufacturers recommen-
dations, when selecting sanding paper.
Larger
O
X
MMM
Содержание DSL800
