![background image](http://html1.mh-extra.com/html/makita/dhr182zu/dhr182zu_instruction-manual_4098811011.webp)
11 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
DHR182
Capacities
Concrete
18 mm
Core bit
35 mm
Diamond core bit (dry type)
32 mm
Steel
13 mm
Wood
24 mm
No load speed
0 - 1,350 min
-1
Blows per minute
0 - 5,000 min
-1
Overall length
301 mm
Rated voltage
D.C. 18 V
Net weight
2.4 - 3.2 kg
Optional accessory
Model:
DX05
Suction performance
250 l/min
Operating stroke
Up to 90 mm
Suitable drill bit
Up to 160 mm
Net weight
0.9 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications and battery cartridge may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B
•
Some of the battery cartridges listed above may not be available depending on your region of residence.
WARNING:
Only use the battery cartridges listed above.
Use of any other battery cartridges may cause
injury and/or fire.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745-2-6:
Model DHR182
Sound pressure level (L
pA
) : 89 dB(A)
Sound power level (L
WA
) : 100 dB (A)
Uncertainty (K) : 3 dB(A)
Model DHR182 with DX05
Sound pressure level (L
pA
) : 90 dB(A)
Sound power level (L
WA
) : 101 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE:
The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE:
The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Содержание DHR182ZU
