[3] DISASSEMBLY/ASSEMBLY
[3]-4. Inner housing complete (cont.)
ASSEMBLING
Compression
spring 32
claw
claw
Change plate
2. While aligning the holes of
Change plate and Inner housing
complete,
hitching claws of Change plate
to Compression spring 32.
3. While aligning passing holes
of Stopper plate to the sames
of Change plate,
set Stopper plate to
Inner housing complete.
4. Insert Pin 4 to Inner housing complete
through the passing holes of Change
plate and Stopper plate.
Note in Assembling
:
Do not re-use the removed Felt 4x3.
Because this part has been damaged
when disassembling.
1. Put a new Felt 4x3 into the hole of
Inner housing complete, and then
mount Compression sprint 32 to
Inner housing complete.
Stopper plate
Felt 4x3
Assemble Inner housing complete as drawn in
Fig. 17
.
Pin 4
Pin 4
Pin 4
Rib
Rib
5. Pin 4 has to be stepped at the same level of
Inner housing’s Rib when pressing it with
Arbor press.
Fig. 17
P 13/ 17
R
epair
