19
C
Working in winter
In order to prevent carburetor icing in conditions of low tempera-
ture combined with high humidity, and below + 5°C in order to
get up to operating temperature faster, heated air can be taken
from the cylinder.
Remove the
Þ
lter hood (see „Cleaning air
Þ
lter“)
Remove the insert (
10
) and insert it as shown in position
B
for
cold-weather operation.
At temperatures above + 5°C the carburetor must NOT be fed
heated air.
Failure to follow these instructions can lead to
damage to the cylinder and piston
!
At temperatures over +5°C place the insert in position
A
for
normal operation.
Position
A
- Normal
operation
Position
B
-
Cold-weather
operation
Reinstall the
Þ
lter hood.
B
A
10
11
D
Handle heating
(only DCS6400H, DCS6401H, DCS7300H, DCS7301H,
DCS7900H, DCS7901H)
The electrically heated handles are activated by pushing the
switch (
11
).
On:
red marking on switch visiable
Off:
red marking on switch not visiable