![background image](http://html1.mh-extra.com/html/makita/dco180/dco180_technical-information_4069445008.webp)
P
8
/
8
W
iring diagram
Fig. D-2
Attach Receptacles to the tabs inside Switch.
Attach Insulated terminals to Switch as shown below.
Put Lead wires connected to Terminal
under the rib on Controller.
Do not pinch Lead wires connected to Switch
between the ribs on Housing L/R and Endbell complete.
Receptacle (2 pcs.)
Insulated terminal (2 pcs.)
Switch
Ribs on Housing R
Endbell complete
Cross-section betweenA and A’
Ribs on Housing L
A
A’
Terminal
Rib of Controller
Boss
Endbell complete
Controller
Place Connectors in this space.
Do not put Lead wires on this rib.
Pass black lead wire and red lead wire from Endbell complete
through Line filter, and then place Line filter in this space between
Boss and Endbell complete (when Line filter is used.)