Makita DCL182, Инструкция по эксплуатации

Страница: 6 / 32

6
because they are different each other.
1
2
3
008935
1. Insert the protrusion of the dust bag into the
groove in the dust stopper as shown in the figure.
1
008932
2. There is no distinction between the upper and
lower sides of the dust bag. You may insert its
protrusion of any side into the lower groove of the
dust stopper.
008933
3. Overlap the frame of dust stopper with that of the
dust bag.
1
011559
4. Place the dust stopper and the dust bag together
into the cleaner cavity in the same direction of
arrow on the dust stopper. Insert them all the way
into the slots in the cleaner cavity.
011555
5. Place the entire cloth part of the dust bag inside
the tool itself.
1
011541
6. Close the front cover completely.
Installing the paper pack
008928
1. Unfold the entrance of the paper pack before
setting it on the dust stopper.
1
2
008930
Use the dust stopper also when installing dust pack. Be
careful not to take the upper side for the lower side by
mistake because they are different each other.
1. Upper side of
dust stopper
2. Lower side of
dust stopper
1. Front cover
1. Cleaner cavity
1. Lower groove
1. Dust stopper
2. Groove
3. Dust bag