P 1
2
/ 1
3
W
iring diagram
Putting Power supply cord unit
Putting Connectors
Fig. D-3
Fig. D-2
Tube
Cord clamp
Cord clamp
Power supply cord unit
Face the tube of Power supply cord unit to Housing L, and set Power supply cord unit
in place as drawn below.
Housing L
Grip
Do not put any Lead wires
between Terminal and Rib B.
Rib B
Terminal
Cord clamp
5-pin connector
6-pin connector
Tube
Power supply
cord unit
Rib A
Power supply cord has to be fastened with
Cord clamp so that the cord end aligns to Rib A.
Do not clamp Tube with Cord clamp.
Power
supply
cord
Controller
Stator
Boss
Flag connectors have
to be connected so that
their wire connecting
portion is located to
the opposite side of
+ - pole marks.
Route Stator’s Lead wires
between Controller and Boss.
3-pin connector
Room for
5-pin connector
Fit 3-pin connector into the room on
Housing L as drawn below, and then
put 6-pin connector on 3-pin connector
as drawn in right.
Put Fuse in this place.
(for
North American countries
.)
