![background image](http://html1.mh-extra.com/html/makita/btm40/btm40_technical-information_4246063008.webp)
P
8
/1
0
Fig. D-1
Fig. D-2
W
iring diagram
C
ircuit diagram
wire connecting
portion
Connecting Controller with Terminal
Flag terminal
Terminal
pole marking
Each Flag terminal must be so connected with
Terminal that its wire connecting portion
is located over the pole marking of Terminal.
White
Blue
Yellow
Color index of lead wires' sheath
Black
Red
DC Motor
red dot marking
LED Light circuit
Line filter*
* Line filters are not used
for some countries.
Line filter*
Connector of
LED Light circuit
Connector of Controller unit
Battery capacity warning lamp
Terminal
Controller unit
Fig. D-3
If connected as shown below,
Lead wires interfere with
Handle cover.
Connecting Controller with Switch
Controller
The electrical parts and wires indicated
by the gray shaded area are component
parts of Controller unit.
Switch
Switch
Dial
[Wrong]
Insulated terminals must be
so connected with Switch
that the Lead wires are placed
on Switch tumbler side.
[Correct]
Switch tumbler
Switch
Insulated terminal