![background image](http://html1.mh-extra.com/html/makita/btm40/btm40_technical-information_4246063003.webp)
P
3
/1
0
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. DC Motor
Fig. 3
(2) Remove Crank housing complete from Motor housing. (
Fig. 3
)
DISASSEMBLING
Terminal of DC motor
Flag terminal of Controller unit
2. Remove Head cover (R) from Crank housing complete
by unscrewing four 3x16 Tapping screws.
1. Disconnect Connector of LED light circuit from
that of Controller unit, then disconnect Flag terminals
of Controller unit from Terminal of DC motor.
Head cover (R)
Head cover (L)
3. Pull out the lead wires of LED light circuit from
Motor housing, then remove LED light circuit from
Head cover (L).
4. Head cover (L) can now be removed from
Crank housing complete.
5. Remove Crank housing complete by unscrewing
four 4x25 Tapping screws.
LED light circuit
Crank housing complete
4x25 tapping screw
(4 pcs.)
Motor housing
Head cover (L)
LED light circuit
Head cover (L)
Connector of
Controller unit
Connector of
LED light circuit
Motor housing
Crank housing
complete
3x16 tapping screw
(4 pcs.)