Makita BTL060, Инструкция по эксплуатации

Страница: 3 / 44

3
ENGLISH (Original instructions)
Explanation of general view
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Switch lever
3-1. Lamp
4-1. Reversing switch lever
6-1. Bit 6-2. Sleeve
8-1. Insert bit
8-2. Spindle
9-1. Groove
9-2. Screw
9-3. Hook
10-1. Hex bolt 10-2. Angle head
11-1. Groove
11-2. Tooth
12-1. Straight head
13-1. Ratchet head
SPECIFICATIONS
Model BTL060 BTL061
Machine screw 4 mm - 8 mm
Capacities
Bolt 4 mm - 12 mm
No load speed (min
-1
) 0 - 2,000
Impacts per minute 0 - 3,000
Max. fastening torque 60 N•m
Overall length 387 mm
Net weight 1.7 kg 1.5 kg
Rated voltage D.C. 14.4 V D.C. 18 V
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
ENE033-1
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA
) : 91 dB(A)
Sound power level (L
WA
) : 102 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model BTL060
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
h
) : 9.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
Model BTL061
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
h
) : 17.5 m/s
2
Uncertainty (K) : 1.5 m/s
2
ENG901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
•
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
•
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-15
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Angle Impact Driver
Model No./ Type: BTL060,BTL061
are of series production and