P 9/ 9
Fig. 21
[2] Wiring in Housing
W
iring diagram
Brush holder complete
Put Light circuit in place
so that the orange lead wire
faces toward the Terminal side.
[2] -1. Lead Wires of LED
Connector
Light circuit
lead wire holder
lead wire holder
LED
Be sure that the lead wires
of LED are tight here.
As illustrated below, fix the two lead wires (red and black) of LED
with lead wire holders, and route them between the pin and the boss.
pin
boss
Fit the corner of LED in this
corresponding corner of Housing (L).
LED
Connector (large)
Connector (small)
Light circuit
rib
Terminal side
Switch side
Do not cross the lead wires of LED here.
Lead wire
(orange)
pin
lead wire holder
With these lead wire holders,
fix the lead wires connected
to each connector.
20°
[2] -2. Other Lead Wires
Assemble each Connecting
terminal to Switch at approx.
20 degrees to the vertical.
Switch
The lead wire (blue) from
Connector to Switch has to
be routed inside of this pin.
Put the following lead wires
between the rib and Light circuit.
*Lead wires (red and black) from
Terminal to Connector (small)
*Lead wire (blue) from Switch
to Connector (small)
